Perko 0466 Manuel d'utilisateur télécharger pdf

In order to comply with ‘72 COLREGS and the U.S. Inland Rules, the following must

be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding.

1). For proper light selection, positioning and configuration, refer to A.B.Y.C.

Standard A-16*, the ‘72 COLREGS*, and the U.S. Inland Rules*.

2). These lights are designed to be mounted on a horizontal surface. Horizontal

rotation of these lights is unimportant, as all-round lights have 360° horizontal arc

of visibility.

3). Place a mark at center of the selected mounting location.

4). Cut out the mounting template below. Place it on the mounting surface such that

the reference mark (drawn above) is directly underneath the center of the template.

5). Drill indicated holes through the template to accommodate #8 round or pan head

mounting screws and electrical supply.

6). Attach supply connections to the light, making sure to wire in accordance with both

A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical

Systems (33 CFR 183)*.

7). Mount the base in accordance with the template.

8). IMPORTANT: Globes must be vertical during operation (see Diagram #1).

9). Relamp only with bulb type as marked on globe or inside fixture. For these lights

use ANSI #90 bulbs (PERKO Cat. No. 0337011DP 12V, 7W).

*The above referenced standards can be obtained from:

(1). American Boat & Yacht Council, Inc. (2). U.S. Coast Guard

613 Third Street, Suite 10 Washington, D.C. 20593

Annapolis, MD 21403 (or your local C.G. Office)

PERKO, INC.

16490 N.W. 13th Avenue

Miami, FL 33169-57070

www.perko.com

12/08

0455INS1

CAT NOS. 0455 & 0466 SERIES

MOUNTING TEMPLATE

NOTE: GLOBES MUST BE

VERTICAL DURING

OPERATION

DIAGRAM #1

Cat. No. 0466 Series

White All-Round Lights (All Sizes)

These lights are designed for use on

POWER or SAIL

driven vessels under 20 meters (65.6 ft.) in length

operating on a nominal 12 volt system.

Cat. No. 0455 Series

White All-Round Lights (All Sizes)

These lights are designed for use on

POWER

driven

vessels under 20 meters (65.6 ft.) in length

operating on a nominal 12 volt system.

Fig. 0455 Series

(Power Driven

Vessels Only)

Fig. 0466 Series

(Sail or Power

Driven Vessels)

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Date Tested By: IMANNA Labs.

2/4/03

Meets ABYC A-16

Fig. 0455 Series 1
Fig. 0466 Series 1

Résumé du contenu

Page 1 - Fig. 0466 Series

In order to comply with ‘72 COLREGS and the U.S. Inland Rules, the following mustbe adhered to:MOUNTING INFORMATIONRead all instructions before procee

Modèles reliés 0455

Commentaires sur ces manuels

Pas de commentaire

Perko 0466 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Perko 0466. PERKO 0466 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 0455

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Perko 0466