Perko 1611 Manuel d'utilisateur télécharger pdf

Note: Clear Globes

Must Be

Vertical During

Operation.

CUT OUT ALONG BROKEN LINE

Cat. Nos.

1045P00DP

Fig. 1631 - (All Sizes)

Fig. 1632 - (All Sizes)

Fig. 1650 - (All Sizes)

MOUNTING TEMPLATE A

The above lights with clear globes (0238, 0239 & 0248) are designed for use on power driven vessels

under 20 meters (65.6 ft.) in length operating on a nominal 12 volt system. The above lights with

translucent globes (0201) are for use on sail or power driven vessels under 20 meters (65.6 ft.) in length.

In order to comply with ‘72 COLREGS and U.S. Inland Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding.

1). For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-16*,

‘72 COLREGS and U.S. Inland Rules*.

2). These lights are designed to be mounted on a horizontal surface.

3). For mounting template A, place a mark at the center of the selected mounting location. For templates

B& C, draw a 6 inch long reference line through the center of the selected mounting location and

parallel to the centerline of the boat.

4). Cut out the appropriate mounting template. For template A, place it on the mounting surface such that

the reference mark (drawn above) is directly underneath the center of the template. For templates B &

C, place the template on the mounting surface such that the reference line drawn above is directly

underneath the reference line marked on the template.

5). Drill indicated holes through the template to accommodate #8 oval head mounting screws and either

socket or telescopic poles as required.

6). Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C. Standard

E-9* and U.S. Coast Guard Safety Standards for Boat Electrical Systems (33 CFR 183)*.

7). Mount the base in accordance with the template.

8). Important: Clear globes (0238, 0239 & 0248) must be vertical during operation in order to assure

compliance with the technical details of the regulations and employ the “Reduced Glare” feature of the

1431, 1632 & 1650 series optical systems.

9). Set-up for Operation:

a). Plug-in Models: As pole engages with base, make sure alignment screw in pole slides into the notch

in the base. Push the pole until it engages the electrical connector. Turn the locking collar clockwise

until it drops into place and locks the pole. Clear globes must be vertical. (See Step #8).

b).Telescopic Models: Lock pole in fully extended position. The locking collar on the pole is eccentric and

is turned clockwise to lock and counterclockwise to unlock.

10). Relamp only with bulb type as marked on globe or inside fixture. For clear transparent globes (0248

Series 1311 & 1330 Lights) use ANSI #90 bulbs (PERKO Cat. No. 0337011DP 12V, 7W), for white

translucent globes (0201 Series 1430, 1611, 1630 & 1631 Lights) use ANSI #1004 Bulbs (PERKO Cat.

No. 0337012DP 12V, 11W), and for “Reduced Glare” Globes (0238 & Series 1431, 1632 & 1650 lights)

use ANSI #906 bulbs (PERKO Cat. No. 0338DP2CLR 12V, 9W).

* The above referenced standards can be obtained from:

(1) American Boat & Yacht Council, Inc. (2) U.S. Coast Guard

613 Third Street, Suite 10 Washington, D.C. 20593

Annapolis, MD 21403 (or your local C.G. office)

Translucent

White

All-Round

Light

Collar in Locked Position

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Tested By: IMANNA Labs.

Date: 2/4/03 & 4/25/03

Meets ABYC A-16

Globe 0248

Fig. 1311 & 1330

Globe 0201

Fig. 1611, 1430,

1630 & 1631

Globe 0238

“Reduced Glare”

Fig. 1431

& 1632

Globe 0239

“Reduced Glare”

Fig. 1650

Cat. Nos. 1311, 1330, 1430, 1431, 1611, 1630, 1631, 1632 & 1650 Series

White All-Round Lights (All Sizes)

12/08

1311INS1

PERKO, Inc.

16490 N.W. 13th Avenue

Miami, FL 33169-5707

www.perko.com

1 2

MOUNTING TEMPLATE A 1
Cat. Nos 2

Résumé du contenu

Page 1 - MOUNTING TEMPLATE A

Note: Clear Globes Must Be Vertical During Operation.CUT OUT ALONG BROKEN LINECat. Nos.1045P00DPFig. 1631 - (All Sizes)Fig. 1632 - (All Sizes)Fig. 165

Page 2 - Cat. Nos

Cat. Nos.1059P00DP1059T00DPFig. 1311 - (All Sizes)Fig. 1611 - (All Sizes)Fig. 1330 - (All Sizes)Fig. 1630 - (All Sizes)Cat. Nos.1060P00DP1060TB0DPFig.

Modèles reliés 1330 | 1311 |

Commentaires sur ces manuels

Pas de commentaire

Perko 1611 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Perko 1611. PERKO 1611 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 1330 | 1311 |

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Perko 1611