Perko 1178 Manuel d'utilisateur télécharger pdf

CUT ALONG BROKEN LINE

DRILL FOR #8 SCREWS

MOUNTING TEMPLATE

CAT. NO. 1178000CHR

CAT. NO. 1178DP0CHR

AHEAD

REFERENCE LINE

DRILL 3/8” HOLE FOR

ELECTRICAL SUPPLY

Cat. No. 1178000CHR Masthead Light

Cat. No. 1178DP0CHR Masthead Light

The above light is designed for use on sail or power driven vessels under 20 meters (65.6 ft.) in length

operating on a nominal 12 volt or 24 volt system. In order to comply with ‘72 COLREGS and the U.S.

Inland Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding

1). These instructions show the orientation of the light after the proper mounting location has bee determined. For proper light

selection, positioning and configuration, refer to the A.B.Y.C. Standard A-16*, the ‘72 COLREGS* and the U.S. Inland

Navigation Rules*. This light is usually supplied complete with 12 volt bulb (Cat. No. 0071DP0CLR, 12V, 10W), however 24

volt bulbs (Cat. No. 0072DP1CLR) are available for 24 volt systems. NOTE: PERKO series 1178 used with 24W bulb

0072DP1CLR is not certified in accordance with 33 CFR 183.810 as the light is intended for replacement use only on

appropriate vessels constructed prior to 11/1/03. All previous certifications apply.

2). This light is designed to be mounted on a horizontal surface.

3). Draw a 4” long reference line through the center of the selected mounting location and parallel to the centerline of the boat.

4). Cut out the mounting template below. Tape it on the mounting surface such that the reference line (drawn above) is

directly underneath the reference line marked on the template.

5). Drill 2 holes through the template to accommodate #8 oval head mounting screws. Drill one 3/8” hole to accommo-

date the electric wiring.

6). Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C. Standard E-9* and U.S.

Coast Guard Safety Standards for Boat Electrical Systems (33 CFR 183)*.

7). Mount the light in accordance with the template, making sure the clear lens faces ahead (not astern).

* The above referenced standards can be obtained from:

1). American Boat & Yacht Council, Inc. 2). U.S. Coast Guard

613 Third Street, Suite 10 Washington, D.C. 20593

Annapolis, MD 21403 (or your local C.G. office)

12/08

1178INS1 PERKO, INC.

16490 N.W. 13th Avenue

Miami, FL 33169-5707

www.perko.com

USCG APPROVAL

33 CFR 183.810

Visibility: 3nm

Tested By: IMANNA Labs.

Date: 9/9/03

Meets ABYC A-16

MOUNTING TEMPLATE 1

Résumé du contenu

Page 1 - MOUNTING TEMPLATE

CUT ALONG BROKEN LINEDRILL FOR #8 SCREWSMOUNTING TEMPLATECAT. NO. 1178000CHRCAT. NO. 1178DP0CHRAHEADREFERENCE LINEDRILL 3/8” HOLE FORELECTRICAL SUPPLY

Commentaires sur ces manuels

Pas de commentaire

Perko 1178 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Perko 1178. PERKO 1178 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Perko 1178